Central Heating Systems – Buyer’s Checklist

One of the best ways to increase the value of a home is by upgrading the central heating system. Some of the best reasons for updating is for comfort, to conserve energy or because the current system is no longer operable. Most homes are generally operating at an average of 75% rate of efficiency meaning that 75% of the energy (normally gas, oil or electricity) is utilized in the operation of the furnace. Therefore an average of 25% is wasted, which is money down the drain. Newer central heating systems are made to run more efficiently than ever before. Currently most furnaces that are being installed are operating at a 90% or better average rate of efficiency. Conserving energy equates to lower utility bills which means more money in your bank account. Therefore over time the new central heating system will pay for itself. In addition, the upfront market value of a home is increased with the installation of a new central heating system. If you were to sell the home, the value would be increased by the new system and would also make the home more appealing to a potential buyer.

With central heating, the heat is generated in one central place and then distributed throughout the home or building. This approach differs from local heating where the heating source such as a space heater or fireplace heats only one area or room. A typical system for central heating involves burning fuel such as gas, oil or coal in a boiler or furnace. In a home the furnace is normally located in the basement, attic, utility room or an airing closet. In commercial buildings, the furnace is normally in a dedicated boiler room. Electric central heating systems are more common where there are low cost electricity supplies or geothermal heat pumps are available. There are also green/environmentally geared central heating systems which are becoming more and more popular with growing concern for the environment. Such alternatives to fossil fuels such as solar and wind power are becoming more common but they are still much more expensive to install and therefore have not yet become mainstream.

The heat generated in the furnace, either from electricity, the combustion of fossil fuels or by seizing solar energy, is then distributed throughout the home. There are various methods for doing this. One method is to pump heated air through duct work. Another method involves heating water in the boiler and then circulating steam or hot water through pipes around the home or building. The pipes lead to wall mounted radiators. Each radiator has a regulating control so that the heat can be adjusted in the room.

The central heating system is often part of a larger and more expansive HVAC system (Heating, Ventilation and Air Conditioning). HVAC systems are used to control the temperature and often the humidity. Updating a HVAC system improves a home’s comfort and value while lowering utility costs but does often come with a hefty price tag. Factors such as size, brand and model all contribute to the price of a HVAC system. The price of a new system can range from $750 to $3000. A new furnace will cost on average $1500. This price does not include any accoutrements or installation. When it’s time to get a new central heating system or HVAC system, price is often a concern. It’s important to do your homework so you understand what type of system you currently have and what you need to have implemented. Don’t be afraid to ask questions and always get at least three quotations from notable contractors.

What You Should Know About Types of Home Heating Systems

In order for us to stay comfortable and warm during the cold season, our homes need some form of heating system. There are several types that are available right now, from which you can take your pick. Do you know the kind that your home uses?

To help you out properly, here are some of the more common heating systems that are available today:

Forced Air– The forced air system is by far the most usual type of heating system in use today for both homes and buildings. As the name suggests the system works with heated air being forced to run through a distribution system that runs around the house.

The air that is forced through this system is heated in a centralized furnace that uses some form of fuel. The heating can be done by natural gas, electricity and other fuel types. This form has many advantage to it over the other types.

Radiant Heat- This is another common form of heating, but this type is mostly found in homes only. The idea is to transfer the heat directly from a heated material to the cold surface. There are several ways that this effect can be achieved.

The most ordinary type of radiant heating is in the use of hot water tubes which cab embedded beneath the floors of a room. The water is heated by the use of boilers and the water is distributed through a system of pipes.

Hydronic Heating- This is a lot similar to a radiant heat heating system. It also uses water heated by a boiler system which is then distributed around the house. Instead of the heat transferred from the floors however, the heat in this system is transferred from wall units.

There are many advantages of this heating system. One of those is the fact that it is very quiet,. Another major advantage is the fact that it can be precision controlled when it comes to the temperature.

Steam Radiators- This type of heating system was used a lot in the past, but is a lot less common now. It uses radiators where steam passes through in order to distribute heat. It also uses a boiler system in order for the water to be heated to become steam.

The problem with this system is that the radiators are not really a great to look at. Their presence in a room also limits the way that furniture can be placed around a room. These are the reasons why they are no longer as common now.

Boilers- Though not a particular type of heat distribution system, boilers are the most common way of generating heat that they deserved to be mentioned. Boilers use different fuels and they range from the old systems to new and high tech ones.

These are the heating systems that can be found in homes and in buildings. Which type is the one that you have at home now? It helps to become familiar with all of these types.

Home Heating Systems – Why You Should Use Air Heating Systems and Radiant Heating Systems

Keeping your house warm in the winter can cause a drastic increase in the cost of your bills, be it a gas heating system or a central heating system. Many choose to cope with the cold, or use not recommended practices for heating up the home, such as leaving the oven open while it is on, or wearing heavy clothing inside. There are ways to keep the home warm without paying the extra. A home heating system can be created to keep the warmth already existing in the home within the home. While there may be some extra expenses initially, the home heating system is a great investment and will lower heating bills in days to come.

One type of home heating system is an air heating system or forced air heating system. It is the most common home heating system. It functions within a furnace, which uses heat sources to distribute warm air. The warm air is circulated throughout the house through ducts. The furnace heats the air using sources such as fuel or electricity. The air in this system can be “humidified” or “de-humidified”, and filtered. In addition, it is an inexpensive means of keeping a home warm. Some of the downsides of are the space the ducts take up in the wall, and the possible distribution of allergens throughout the ducts.

Another heart warming system is the radiant heating system. This is a more natural approach to home heating. It’s main component is the transfer of heat to a cold surface. Heating stoves and boilers are also used. This system provides a stable, even source of heat in the home, and is very efficient. The cost of installation of the hot tubing or heat panels can be expensive, but it pays for itself over time. Another system similar to this one is the hot water baseboard system. This system involves hot water that is heated by a boiler in a space within the wall. The water is heated by the boiler and moves through tubes throughout the walls. The heat then spreads throughout the home. The boiler can be heated by natural gas or propane. This method is efficient and provides controlled heat.

Another method that was once used widely within homes was the steam radiating system. Steam radiators are stand up, cast iron radiators that many may remember from their childhood. The radiator works by producing steam which distributes heat. With steam radiators, heat is produced quickly, and they are energy-efficient. However, furniture must be placed around the heater, which doesn’t always go with home decor. Steam radiators can also be fire hazards. However, modern innovation has produced smaller, more convenient steam radiators.

Finally, boilers are a great option. Boilers produce hot water and steam for radiant heat and steam radiator systems. Boilers can be small and compact, and energy-efficient. So during the next cold season, consider any of the above options for heating your home. Your family and your wallet will thank you.